Luna has been designed for everyday riding and complements the performance Halo riding helmet.
The helmet features the same unique 360° ventilation system under the ring and three international safety standards (including PAS015).
The wide peak option improves vision in any weather.
Features
- 360° ventilation system
- Additional ventilation on crown
- Slim and low-profile styling
- Available in black and midnight
- Flexzone peak
- Washable padded headband
- Leather-look harness
- Wide peak available (sizes 55-59cm)
- Multiple safety standards
- Recycled packaging
- Made in the UK
How to fit:
- Place the helmet on the head and hold roughly 1cm above the eyebrow, at its loosest setting.
- Whilst holding the peak in place, begin to slowly tighten the dial fixing at the back of the helmet until secure. Please tighten your dial-fit carefully. Over-tightening of the dial-fit mechanism when the helmet is being worn may cause the dial to lock. If this occurs, simply remove the helmet and release the dial.
- Check the fit by gently pulling down on the peak or front of the helmet. The skin above the eyebrows should move with the motion of the helmet if it fits correctly. Independent movement from the helmet is an indication the helmet is too big or the dial is not fastened tight enough.
- Due to the dial-fit securing the helmet at the base of the skull (occipital ridge), consistent contact around the perimeter of the helmet is not necessary.
- The chin strap should fit just under the chin and gently touch the bottom of the ear lobe, avoiding the throat.
- One finger’s width should be between the chin and the chin strap. The gap between the chin and the chin strap indicates how far the helmet could move in an accident. When doing the chin strap up, place your finger between the strap and your chin to ensure you don’t pinch.
- Before removing the helmet, you should undo the dial. This helps prevent unnecessary stress on the dial fixing and ensures you are securing it correctly with every wear.
Wash care & advice
Top of helmet – wipe clean only
Memory foam removable lining – Wash at 30°C, do not iron, do not tumble dry
Fabric Composition
Carbon top : 45% Nylon, 55% PU
Chin Pad : 75% resin, 25% cotton flannelette
The helmets have ITW buckles. Memory foam lining which removable and can be washable at 30°C.
Benefits:
ABS material shell, it is of super impact resistance, with antibroken and anti-friction capability, it can also resist high temperature of 50℃, low temperature of -20 ℃. And also, the shell and peak are separated.
Absorbing padding is made of EPS material, with superior impact resistance and shock absorption, it has a cushioning effect in case of external strong impact, and can prevent the head from direct impact and play a protective role.
The adopted separation shell and peak, which can be matched with big peak or small peak respectively, with soft texture can disperse the impact force of collision and reduce the injury to the neck during collision.
The design of multi-directional air vents increases airflow circulation to dissipate heat fast, which makes it more comfortable to wear.
Reviews
There are no reviews yet.